Durafine Release Agents

Decorative Laminate Release Agents – USA Supplier

For excellent results

Decorative Laminate Release Agent Supplier in USA

The Durafine Advantage

Durafine Coatings is a full-service manufacturer of water-borne industrial coatings and release agents. As a trusted Decorative Laminate Release Agents – USA Supplier, we also offer custom manufacturing to meet your specific requirements, including precise color matching.

HARDENER : 340/341 SERIES

Latent hardener for Melamine-formaldehyde, Urea-formaldehyde impregnation resins with long pot-life and high curing activity.
CA-340 does not contain chloride ions.

WETTING AGENT : WT-320

Wetting agent for Melamine-formaldehyde, Urea formaldehyde resins and impregnation of decor papers which are difficult to process.
Effectively reduces the surface tension of the resin allowing for better penetration in the paper.

RELEASE AGENT : RA-330

Special internal release agent that can be added directly to any aqueous resin system (Melamine, Phenolic or Urea aqueous resin mixture), Used for high pressure and low pressure impregnation.

ANTIBLOCK AGENT : AB-310 SERIES

Well suited for the decorative coating of plane carrier materials (e.g. chip boards, fiber boards, sheets on bases of phenolic resins a.s.o.).
The impregnated decorative papers can be used in the short cycle process as well as in the continuous production of high-pressure laminates Also usable for post forming systems.

GLOSS AGENT : GP-355 SERIES

Additive allows to achieve a higher gloss level and better flow properties of the resin.
Ideal additive for melamine-formaldehyde, urea-formaldehyde resins and impregnation of decor papers which are difficult to process.
Effectively reduces the surface tension of the resin allowing for better penetration in the paper and will give a higher flexibility.

MODIFIER : MF-358 SERIES

MF-358 is a waterbased modifier which is based on a combination of Acrylat Resin, Glycols and Amines.
Reacts well with melamine-formaldehyde resins and combinations of melamine-formaldehyde resins with urea-formaldehyde resins.
MF-353 is especially suitable for resins which are used for HP-, CPL- and Contilam-process.

DEFOAMER : AF-707 SERIES07

Water based defoamer which shows excellent results at low dosage. Does not contain alcohols or silicones.

Results After Implementation

Key Metric	Before Durafine	After Durafine Custom Additives
Wetting Uniformity	Variable	Consistent, full sheet coverage
Foaming Incidents	Frequent	Reduced by over 90%
Press Release Quality	Occasional sticking	Smooth, residue-free
Paper Rejection Rate	6–8%	<1.5%
Production Speed	25 m/min (avg.)	30–32 m/min (avg.)

Customer Benefits
The customer reported:

Improved laminate surface quality with consistent resin distribution
Reduced downtime due to less press cleaning and rework
Lower chemical consumption through targeted dosing
Fewer rejects boosting first-pass yield and cost efficiency
Strengthened technical collaboration, resulting in a long-term supply partnership

Conclusion Durafine's tailored additive solution delivered process optimization and quality improvements far beyond what standard products could achieve. By customizing wetting agents, anti-foams, and release aids, the customer was able to increase output, reduce waste, and enhance laminate appearance—a significant competitive edge in the decorative surfaces market.

Durafine Case Study

Custom Additive Solutions Improve Impregnation Quality for Decorative Laminates

A major manufacturer of decorative laminates was experiencing quality and consistency issues during the paper impregnation stage of production. The company processes melamine- and phenol-based resins into decorative papers used for high-pressure laminates (HPL) and compact laminates for furniture, wall panels, and flooring. Despite using standard additives, the operation faced several persistent challenges that impacted yield and surface quality.

The Problem
The customer reported:

Inconsistent wetting of décor and kraft paper, especially at high-speed lines
Foaming issues leading to resin overflow and uneven resin distribution
Release defects during hot press lamination (e.g., sticking and surface blemishes)
Increased waste and machine downtime due to paper rejects and roll contamination

These issues negatively affected production efficiency, final product aesthetics, and cost of quality.

Durafine's Approach
Rather than recommending off-the-shelf products, Durafine undertook a process-level technical study. This involved:

On-site evaluation of resin viscosity, impregnation speed, dryer conditions, and paper types
Sampling and testing under simulated production conditions
Collaborative discussions with the technical team to identify root causes
Tailoring a custom additive package including:

High-efficiency wetting agent for uniform resin penetration
Anti-foam additive compatible with fast-curing resins
Optimized release agent for clean separation during hot pressing

Durafine is your cost-effective choice

How we can help you customize

1. Download

Download the data sheet(s) of the products. Check the specifications. Know that a lot can be customised.

2. Contact us

Use the link below to get in touch. Give us your contact details and we will reach out to discuss your requrements.

3. We deliver to your needs

Once we understand the specs, we process your order and get to work. We will deliver exactly as per your requirement.

info@durafinecoatings.com

(+1) 416.628.3132